Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 23", 35 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB). Does not fit models equipped with ABS brakes.

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 34", 35 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB).

Diamondback™ Multi-Length Modular Brake Lines - Upper - 19", 90 degree

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 19", 90 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB). Does not fit models equipped with ABS brakes.

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 25", 35 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB).

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 20", 35 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB). Does not fit models equipped with ABS brakes.

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 32", 35 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB).

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 26", 90 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB).

Diamondback™ Multi-Length Modular Brake Lines - Upper - 18", 90 degree

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 18", 90 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB). Does not fit models equipped with ABS brakes.

Diamondback™ Modular Braided Brake Lines - Upper - 24", 0 degree

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 24", 0 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB). Does not fit models equipped with ABS brakes.

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 28", 90 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB).

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 21", 35 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB).

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 23", 90 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB). Does not fit models equipped with ABS brakes.

Diamondback™ Multi-Length Modular Brake Lines - Upper - 19", 0 degree

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 19", 0 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB). Does not fit models equipped with ABS brakes.

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 25", 90 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB).

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 24", 90 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB).

Diamondback™ Modular Braided Brake Lines - Lower

The two-piece design features common lower brake lines and multiple length upper brake lines in 1"-2" increments up to 34 inches. The completely assembled upper lines come in three different banjo angles allowing for automatic banjo clocking. With only one hidden JIC connection, these brake lines are visually streamlined at the sight points and match all other Diamondback™ cables. Upper and lower brake lines are sold separately. Kit includes brake lines and all necessary mounting hardware.

Lower

Fits '06-later FXD, FXDB, FXDC, FXDL, '06 FXD35

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 32", 0 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB). Does not fit models equipped with ABS brakes.

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 32", 90 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB). Does not fit models equipped with ABS brakes.

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 30", 0 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB).C, FXSTSSE1/2, and FLSTSB).

Diamondback™ Modular Braided Brake Lines - Upper - 23", 0 degree

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 23", 0 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB). Does not fit models equipped with ABS brakes.

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 20", 90 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB). Does not fit models equipped with ABS brakes.

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 22", 0 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB). Does not fit models equipped with ABS brakes.

Diamondback™ Modular Braided Brake Lines - Upper - 21", 0 degree

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 21", 0 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB). Does not fit models equipped with ABS brakes.

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 28", 35 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB).

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 26", 0 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB).

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 34", 90 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB). Does not fit models equipped with ABS brakes.

Diamondback™ Modular Braided Brake Lines - Upper - 21", 90 degree

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 21", 90 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB). Does not fit models equipped with ABS brakes.

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 22", 35 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB).

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 30", 35 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB). Does not fit models equipped with ABS brakes.

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 20", 0 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB). Does not fit models equipped with ABS brakes.

Supersedes to part number 42112-08A

Diamondback™ Multi-Length Modular Brake Lines - Upper - 18", 0 degree

The two-piece design features common lower brake lines and multiple length upper brake lines in 1"-2" increments up to 34 inches. The completely assembled upper lines come in three different banjo angles allowing for automatic banjo clocking. With only one hidden JIC connection, these brake lines are visually streamlined at the sight points and match all other Diamondback™ cables. Upper and lower brake lines are sold separately. Kit includes brake lines and all necessary mounting hardware.

Upper - 18", 0 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB). Does not fit models equipped with ABS brakes.

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 28", 0 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB).

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 24", 35 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB).

Diamondback™ Modular Braided Brake Lines - Lower

The two-piece design features common lower brake lines and multiple length upper brake lines in 1"-2" increments up to 34 inches. The completely assembled upper lines come in three different banjo angles allowing for automatic banjo clocking. With only one hidden JIC connection, these brake lines are visually streamlined at the sight points and match all other Diamondback™ cables. Upper and lower brake lines are sold separately. Kit includes brake lines and all necessary mounting hardware.

Lower

Fits '06-'08 FXDWG models.

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 34", 0 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB).

Diamondback™ Modular Braided Brake Lines - Upper - 30", 90 degree

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 30", 90 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB). Does not fit models equipped with ABS brakes.

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 26", 35 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB).

Diamondback™ Multi-Length Modular Brake Lines - Upper - 18", 35 degree

Now available in "Multi-Length" configurations, Diamondback™ Modular Brake Lines are sized to fit almost any handlebar and control configuration. The two-piece design features common lower brake lines and a wide selection of upper brake lines in lengths designed to accommodate most Original Equipment and accessory handlebar shapes. The completely assembled upper lines are available in lengths that accommodate up to +10" over the stock configuration and can be ordered with 0 degree and 90 degree banjo angles forproper installation. The single JIC connection at the triple tree gives the lines a visually streamlined look, and the micro-fine wire braiding complements the available Diamondback™ Clutch and Throttle Control cables. Upper and lower brake lines sold separately.

Upper - 18", 35 degree

Fits '99-later FXDWG, '01-later FXDL, '06-later FXD, FXDB, FXDL, FXDC, '99-later FXST, FXSTB, and '00-later Softail® models (except FXSTS, FLSTSC, FXSTSSE1/2, and FLSTSB). Does not fit models equipped with ABS brakes.